Need Help With Import/Export var

[Guest]

I know how to export procedures, but when I try to export a variable I get an error "exported symbol 'drive' has not been declared".

Here is the code which I use the import:

code:

import GUI, Determine in "Drive Determine.tu", Drive in "Drive Determine.tu", var drive in "Drive Determine.tu"

Now here is the module:

code:

unit module Determine     export Drive, var drive     procedure Drive         var computerLib := "KLCVI-LIB-"         var drive : string         if (Sys.GetUserName = "Drew Martell") then %tells if im on my home computer             drive := "F"         elsif (Sys.GetUserName = "martelld") then %tells if im at school             drive := "D"         elsif (Sys.GetComputerName = computerLib + "01") or                 (Sys.GetComputerName = computerLib + "02") or                 (Sys.GetComputerName = computerLib + "03") or                 (Sys.GetComputerName = computerLib + "04") or                 (Sys.GetComputerName = computerLib + "05") or                 (Sys.GetComputerName = computerLib + "06") or                 (Sys.GetComputerName = computerLib + "07") or                 (Sys.GetComputerName = computerLib + "08") or                 (Sys.GetComputerName = computerLib + "09") or                 (Sys.GetComputerName = computerLib + "10") or                 (Sys.GetComputerName = computerLib + "11") or                 (Sys.GetComputerName = computerLib + "12") or                 (Sys.GetComputerName = computerLib + "13") then             drive := 'E'                end if                end Drive end Determine

I know this unit is useless since Turing does it for you, but I want to know how to import variables.

[NikG]

First in the module, I believe you can't export the variable when it's inside a procedure, only when it's declaredt outside.

Second, are you sure it should be "export var drive"?
shouldn't you leave the "var" out? (that's just a guess, anyone want to correct me?)

[Guest]

Ill try declairing outside then importing...

[Guest]

Now it says "Unit symbol is determine, not drive" when I place it next to the other imports. This is hard =(

[Guest]

Meh nvm, it's not that important. I think its because when I import it, it then attatches itself to a string when its a char or int or something and gives me an error. Thanks anyways.

[NikG]

code:

% Determine.tu unit module Determine     export Drive     fcn Drive : string         var computerLib := "KLCVI-LIB-"         var drive : string         if (Sys.GetUserName = "Drew Martell") then %tells if im on my home computer             drive := "F"         elsif (Sys.GetUserName = "martelld") then %tells if im at school             drive := "D"         elsif (Sys.GetComputerName = computerLib + "01") or                 (Sys.GetComputerName = computerLib + "02") or                 (Sys.GetComputerName = computerLib + "03") or                 (Sys.GetComputerName = computerLib + "04") or                 (Sys.GetComputerName = computerLib + "05") or                 (Sys.GetComputerName = computerLib + "06") or                 (Sys.GetComputerName = computerLib + "07") or                 (Sys.GetComputerName = computerLib + "08") or                 (Sys.GetComputerName = computerLib + "09") or                 (Sys.GetComputerName = computerLib + "10") or                 (Sys.GetComputerName = computerLib + "11") or                 (Sys.GetComputerName = computerLib + "12") or                 (Sys.GetComputerName = computerLib + "13") then             drive := 'E'         else             drive := "NF"         end if         result drive     end Drive end Determine

code:

import Determine in "Determine.tu" put Determine.Drive

That works, I just changed Drive to a function.

Yay, I learned something new.

[Cervantes]

vahnx wrote:

Here is the code which I use the import:

code:

import GUI, Determine in "Drive Determine.tu", Drive in "Drive Determine.tu", var drive in "Drive Determine.tu"

You should only be importing the module, as NikG showed. By importing the module into your program, you're also importing the public variables of that module (the variables that the module exported).

Exporting it with the var keyword previously makes it writable. That is, you can assign it a new value from outside the module. This is often a bad idea.

[Delos]

Cervantes wrote:

vahnx wrote:

Here is the code which I use the import:

code:

import GUI, Determine in "Drive Determine.tu", Drive in "Drive Determine.tu", var drive in "Drive Determine.tu"

You should only be importing the module, as NikG showed. By importing the module into your program, you're also importing the public variables of that module (the variables that the module exported).

Exporting it with the var keyword previously makes it writable. That is, you can assign it a new value from outside the module. This is often a bad idea.

Though as we all know, Turing's treatment of read-only variables is, uh, a facade. A total sham! It will give you a warning indicating that read-onlies cannot be modified externally, and then promptly proceed to modify them!
Ah well...

[NikG]

Ahhhh shoot!

The problem vahnx was having, and I wasn't able to figure out until just a minute ago, was simply that the drive variable he had in his original code was part of Determine!

So you can't just call it with "put drive", you have to use "put Determine.drive"

[Cervantes]

Delos wrote:

Though as we all know, Turing's treatment of read-only variables is, uh, a facade. A total sham! It will give you a warning indicating that read-onlies cannot be modified externally, and then promptly proceed to modify them!
Ah well...

That's not so bad. In Ruby, you get the same functionality with constants. You can even avoid getting the warning by doing a

code:

Object.instance_eval {remove_const :Constant_name}

Yeah, non-constant constants are kinda wierd, but you don't see me complaining.

[Guest]

Yay functions =)