Can anyone confirm this language?

[cubera]

I'm new to programming but i have experience with java and turing and im planning to learn either C, C++, C# next. However i have question regarding a source code i found from a project from inscrutables about a led coffee table, i just cant tell what language it is. To me it looks like C#, maybe C? im not sure so i need some help from an expert or perhaps someone who has experience with these programming languages to verify the language this person has used.
Also im sorry if this is the wrong section.



Heres the code:

/***
PIN ASSIGNMENTS ON ATMEGA48

PC6 (PCINT14/RESET)
PC5 (ADC5/SCL/PCINT13) // I2C Clock input
PC4 (ADC4/SDA/PCINT12) // I2C Data input
PC3 (ADC3/PCINT11) //Sensor 4 IR Receiver
PC2 (ADC2/PCINT10) //Sensor 3 IR Receiver
PC1 (ADC1/PCINT9) //Sensor 2 IR Receiver
PC0 (ADC0/PCINT8) //Sensor 1 IR Receiver

PB7 (PCINT7/XTAL2/TOSC2) //IR 4 Trigger
PB6 (PCINT6/XTAL1/TOSC1) //IR 3 Trigger
PB5 (SCK/PCINT5) //IR 2 Trigger
PB4 (MISO/PCINT4) //IR 1 Trigger
PB3 (MOSI/OC2A/PCINT3) //PWM 3
PB2 (SS/OC1B/PCINT2)
PB1 (OC1A/PCINT1)
PB0 (PCINT0/CLKO/ICP1)

PD0 (PCINT16/RXD)
PD1 (PCINT17/TXD)
PD2 (PCINT18/INT0)
PD3 (PCINT19/OC2B/INT1) //PWM 4
PD4 (PCINT20/XCK/T0)
PD5 (PCINT21/OC0B/T1) //PWM 2
PD6 (PCINT22/OC0A/AIN0) //PWM 1
PD7 (PCINT23/AIN1)
***/

#define IR_1_ON PORTB |= (1<<4)
#define IR_2_ON PORTB |= (1<<5)
#define IR_3_ON PORTB |= (1<<6)
#define IR_4_ON PORTB |= (1<<7)
#define IR_1_OFF PORTB &= ~(1<<4)
#define IR_2_OFF PORTB &= ~(1<<5)
#define IR_3_OFF PORTB &= ~(1<<6)
#define IR_4_OFF PORTB &= ~(1<<7)

#define PWM1 6 //PORTD PWM pin assignments
#define PWM2 5 //PORTD
#define PWM3 3 //PORTB
#define PWM4 3 //PORTD

#define F_CPU 8000000UL

#include
#include
#include
//#include

/****Function Declarations****/
int ADC_read(void);
void A2D_Channel_Select(unsigned char channel);
void Init_ADC(void);
void Init_Timer0(void);
void Init_Timer1(void);
void Init_Timer2(void);
void Delay(void);
void Calibrate_Sensors(void);
//void Init_I2C_Slave_Rx(void);

All, but one, of these variables is declared volatile because basically all of the work is done in
interrupt service routines

/****Global Variable Declarations****/
volatile char Sensor_Values_Updated = 0;
volatile char Timer1_Overflow = 0;
volatile unsigned char channel = 0;
volatile int Amb_Sensor_1 = 0, Amb_Sensor_2 = 0, Amb_Sensor_3 = 0, Amb_Sensor_4 = 0;
volatile int Sensor_1 = 0, Sensor_2 = 0, Sensor_3 = 0, Sensor_4 = 0;
volatile int Initial_1 = 0, Initial_2 = 0, Initial_3 = 0, Initial_4 = 0;
volatile int New_PWM1 = 0, New_PWM2 = 0, New_PWM3 = 0, New_PWM4 = 0;
volatile int Old_PWM1 = 0, Old_PWM2 = 0, Old_PWM3 = 0, Old_PWM4 = 0;

unsigned char buffer = 8;

int main(void)
{
DDRB = 0xff;
//make sure IR emitters are turned off, and PWM 3
PORTB &= ~((1 << 7)|(1 << 6)|(1 << 5)|(1 << 4)|(1 << 3));
DDRC = 0x00; //make PORT C inputs

DDRD = 0xff;
PORTD = 0x00; //set all of PORT D low. ensures

Init_ADC();

sei();

Calibrate_Sensors();

PORTD |= (1 << PWM1); //blink to indicate end of Calibration
_delay_ms(600);
PORTD &= ~(1 << PWM1);

Init_Timer0();
Init_Timer2();

//Init_I2C_Slave_Rx();

while(1)
{
//do something?
//. . .
}

}


With the clock running at roughly 8MHz, and Timer 1 counting up to 65535. The timer will overflow roughly 122 times a second. This ISR will fire and the timer overflow variable will increment, and then the SWITCH/CASE function will choose the next pixel to test

ISR(TIMER1_OVF_vect)
{
Timer1_Overflow++; //increment timer overflow variable

switch(Timer1_Overflow)
{
case 1:
A2D_Channel_Select(0); //select ADC channel 0
Amb_Sensor_1 = ADC_read(); //take ambient IR sensor reading
IR_1_ON; //turn on IR 1 LED, PORTB |= (1<<4)
Delay(); //delay for the IR receiver to settle
Sensor_1 = ADC_read(); //take active ADC reading of IR receiver
IR_1_OFF; //turn off IR 1 LED

New_PWM1 = (Sensor_1 - Amb_Sensor_1) - Initial_1; //condition readings
if(New_PWM1 <= 0) { New_PWM1 = 0; } //prevent negative numbers

simple low-pass filter, (87.5% * Old) + (12.5% * New). It just takes the old value and weights it more than the older value. Has the same effect of slowing down change, which is crucial in providing fluid changes in brightness
New_PWM1 = ((7*Old_PWM1)>>3) + (New_PWM1>>3);

if(OCR0A >= 1) {DDRD |= (1 << PWM1);}
else { DDRD &= ~(1 << PWM1); } //turn off LEDs completely

//artificially increase the value of sensor reading, not entirely necessary, but makes the sensor seem more sensitive by being brighter sooner
New_PWM1 <<= 2;
if(New_PWM1 > 255) { New_PWM1 = 255; }
OCR0A = New_PWM1;
New_PWM1 >>= 2;


The below code that is entirely commented out is a different brightness algorithm. It is a triggering algorithm that will fade the LEDs on when something comes within a threshold. And the LEDs will fade out slowly when the object is out of the threshold distance. This is useful because the operation could be more reliable and the fade out time can be adjusted to be very long or however long you want it. I haven't tested this code so I am not sure if it will work 100%

/***** //Trigger sequence
if(New_PWM1 > Initial_1)
{
DDRD |= (1 << PWM1);

if(OCR0A < 255)
{
OCR0A += (255 - OCR0A)>>2 ;
//OCR0A++;
}

if (New_PWM1 < (Initial_1 + 8))
{
Initial_1 = ((7*Initial_1)>>3) + (New_PWM1>>3);
}
}

else if(New_PWM1 < Initial_1)
{
if(OCR0A > 0)
{
OCR0A -= (OCR0A >> 4)+1;
//OCR0A--;
}
else if(OCR0A <= 0)
{
DDRD &= ~(1 << PWM1);
}
}
*****/
Old_PWM1 = New_PWM1;
break;

case 2:
A2D_Channel_Select(1); //select ADC channel 1
Amb_Sensor_2 = ADC_read();
IR_2_ON; //turn on IR 2 LED, PORTB |= (1<<5)
Delay(); //delay for the IR receiver to settle
Sensor_2 = ADC_read(); //take ADC reading
IR_2_OFF; //turn off IR 2 LED

New_PWM2 = (Sensor_2 - Amb_Sensor_2) - Initial_2;
if(New_PWM2 < 0) { New_PWM2 = 0; }

New_PWM2 = ((7*Old_PWM2)>>3) + (New_PWM2>>3);
if(OCR0B >= 1) {DDRD |= (1 << PWM2);}
else { DDRD &= ~(1 << PWM2); }

New_PWM2 <<= 2;
if(New_PWM2 > 255) { New_PWM2 = 255; }
OCR0B = New_PWM2;
New_PWM2 >>= 2;
/*
if(New_PWM2 > Initial_2)
{
DDRD |= (1 << PWM2);

if(OCR0B < 255)
{
OCR0B += (255 - OCR0B)>>2 ;
//OCR0B++;
}

if (New_PWM2 < (Initial_2 + 8))
{
Initial_2 = ((7*Initial_2)>>3) + (New_PWM2>>3);
}
}

else if(New_PWM2 < Initial_2)
{
if(OCR0B > 0)
{
OCR0B -= (OCR0B >> 4)+1;
//OCR0B--;
}
else if(OCR0B <= 0)
{
DDRD &= ~(1 << PWM2);
}
}
*/
Old_PWM2 = New_PWM2;
break;

case 3:
A2D_Channel_Select(2); //select ADC channel 2
Amb_Sensor_3 = ADC_read();
IR_3_ON; //turn on IR 3 LED, PORTB |= (1<<6)
Delay(); //delay for the IR receiver to settle
Sensor_3 = ADC_read(); //take ADC reading
IR_3_OFF; //turn off IR 3 LED

New_PWM3 = (Sensor_3 - Amb_Sensor_3) - Initial_3;
if(New_PWM3 < 0) { New_PWM3 = 0; }

New_PWM3 = ((7*Old_PWM3)>>3) + (New_PWM3>>3);
if(OCR2A >= 1) {DDRB |= (1 << PWM3);}
else { DDRB &= ~(1 << PWM3); }
New_PWM3 <<= 2;
if(New_PWM3 > 255) { New_PWM3 = 255; }
OCR2A = New_PWM3;
New_PWM3 >>= 2;
/*
if(New_PWM3 > Initial_3)
{
DDRB |= (1 << PWM3);

if(OCR2A < 255)
{
OCR2A += (255 - OCR2A)>>2 ;
//OCR2A++;
}

if (New_PWM3 < (Initial_3 + 8))
{
Initial_3 = ((7*Initial_3)>>3) + (New_PWM3>>3);
}
}

else if(New_PWM3 < Initial_3)
{
if(OCR2A > 0)
{
OCR2A -= (OCR2A >> 4)+1;
//OCR2A--;
}
else if(OCR2A <= 0)
{
DDRB &= ~(1 << PWM3);
}
}
*/
Old_PWM3 = New_PWM3;
break;

case 4:
A2D_Channel_Select(3); //select ADC channel 3
Amb_Sensor_4 = ADC_read();
IR_4_ON; //turn on IR 4 LED, PORTB |= (1<<7)
Delay(); //delay for the IR receiver to settle
Sensor_4 = ADC_read(); //take ADC reading
IR_4_OFF; //turn off IR 4 LED

New_PWM4 = (Sensor_4 - Amb_Sensor_4) - Initial_4;
if(New_PWM4 < 0) { New_PWM4 = 0; }

New_PWM4 = ((7*Old_PWM4)>>3) + (New_PWM4>>3);
if(OCR2B >= 1) {DDRD |= (1 << PWM4);}
else { DDRD &= ~(1 << PWM4); }
New_PWM4 <<= 2;
if(New_PWM4 > 255) { New_PWM4 = 255; }
OCR2B = New_PWM4;
New_PWM4 >>= 2;
/*
if(New_PWM4 > Initial_4)
{
DDRD |= (1 << PWM4);

if(OCR2B < 255)
{
OCR2B += (255 - OCR2B)>>2 ;
//OCR2B++;
}

if (New_PWM4 < (Initial_4 + 8))
{
Initial_4 = ((7*Initial_4)>>3) + (New_PWM4>>3);
}
}

else if(New_PWM1 < Initial_4)
{
if(OCR2B > 0)
{
OCR2B -= (OCR2B >> 4)+1;
//OCR2B--;
}
else if(OCR2B <= 0)
{
DDRD &= ~(1 << PWM4);
}
}
*/
Old_PWM4 = New_PWM4;

Timer1_Overflow = 0; //reset
Sensor_Values_Updated = 1; //new values ready

break;
}//end switch
}//end ISR


This is something I am going to try and figure out later. It is untested elementary code which could allow me to use the Two Wire Interface (I2C) so several controllers and communicate with each other or have one master and a bunch of slaves.
/****
ISR(TWI_vect) //to include later when I get this figured out
{
switch(TWSR)
{
case TW_SR_SLA_ACK: //0x60 //Own address Rx
Byte_Number == 1;
break;

case TW_SR_DATA_ACK: // 0x80 , data in TWDR
switch(Byte_Number)
{
case 1:
Reg_Addr = TWDR;
Byte_Number++;
break;

case 2:
Reg_Val = TWDR;
Byte_Number = 0; //reset, unless more bytes are coming
break;

case Max_Bytes_Expected:
Reg_Val = TWDR;
Byte_Number = 0; //reset, unless more bytes are coming
break;
}
break;

case TW_SR_GCALL_DATA_ACK: // 0x90
if(Byte_Number == 1)
{
Reg_Addr = TWDR;
Byte_Number++;
}
else if(Byte_Number == 2)
{
Reg_Val = TWDR;
Byte_Number = 0; //reset, unless more bytes are coming
}
break;
}//end switch
}//end ISR


void Init_I2C_Slave_Rx(void)
{
//Set Device Address in TWAR
TWAR = 10; //maybe make this as an argument to this function

TWCR |= ((1 << TWEA)|(1 << TWEN));
TWCR &= ~((1 << TWSTA)|(1 << TWSTO));
}
****/


void Calibrate_Sensors(void) //establish initial ambient sensor values
{
char q = 0;

Init_Timer1();

for(q=0; q<32; q++) //should take one second-ish
{
//wait for Sensor cycle to be done, then gather sensors values
while(Sensor_Values_Updated == 0) {}

Initial_1 += (Sensor_1 - Amb_Sensor_1); //initial difference
Initial_2 += (Sensor_2 - Amb_Sensor_2);
Initial_3 += (Sensor_3 - Amb_Sensor_3);
Initial_4 += (Sensor_4 - Amb_Sensor_4);

Sensor_Values_Updated = 0; //reset
}//end for

//condition Initial Ambient Sensor values, plus a buffer
Initial_1 = (Initial_1 >> 5) + buffer;
Initial_2 = (Initial_2 >> 5) + buffer;
Initial_3 = (Initial_3 >> 5) + buffer;
Initial_4 = (Initial_4 >> 5) + buffer;
}

void Init_ADC(void)
{
ADMUX |= 1 << REFS0; //AVCC with external capacitor at AREF pin
ADMUX |= (1<
}

void Init_Timer0(void) //PWM for sensors 1 & 2
{
//Fast PWM, non-inverting, WGM02-WGM00 == 011, no overflow interrupt
TCCR0A |= ((1 << COM0A1)|(1 << COM0B1)|(1 << WGM01)|(1 << WGM00));
TCCR0B |= (1 << CS00); //start clock, no prescale
}

void Init_Timer1(void)
{
//no PWM, enable overflow interrupt,
//TOP == 0xFFFF == 65536 cycles == roughly 122 overflow interrupts/sec
TCCR1B |= (1 << CS10);
TIMSK1 |= (1 << TOIE1);
}

void Init_Timer2(void) //PWM for sensors 3 & 4
{
//Fast PWM, non-inverting, WGM22-WGM20 == 011, no overflow interrupt
TCCR2A |= ((1 << COM2A1)|(1 << COM2B1)|(1 << WGM21)|(1 << WGM20));
TCCR2B |= (1 << CS20); //start clock, no prescale
}


int ADC_read(void) /***select ADC channel prior to calling this function***/
{
int ADC_value = 0;
int ADCsample;
char i;

ADCSRA |= (1< ADCSRA |= (1< while ((ADCSRA & ADSC)); //Wait for conversion to complete, and forget about it

//this is done no more than 64 times, any longer and ADC1_value will need to be larger than an unsigned int!!!!!!
for (i=0; i<64; i++)
{
ADCSRA |= (1< while ((ADCSRA & ADSC)); //wait for conversion to finish
//change back to ADCL for 10 bit precision, and remove left-shift bit setting
ADCsample = ADCH;
//ADCsample += (ADCH<<8); //Left shift the top two bits 8 places
ADC_value += ADCsample; //add ADCsample to ADC_sensor
}
//average sample by right shifting 6 places, same as dividing by 64
ADC_value = (ADC_value >> 6);

return ADC_value;

ADCSRA &= ~(1<
void A2D_Channel_Select(unsigned char channel)
{

switch (channel)
{
case 0: //select A2D channel 0
ADMUX &= ~((1 << 3)|(1 << 2)|(1 << 1)|(1 << 0));
break;

case 1: //select A2D channel 1
ADMUX &= ~((1 << 3)|(1 << 2)|(1 << 1));
ADMUX |= (1 << 0);
break;

case 2: //select A2D channel 2
ADMUX &= ~((1 << 3)|(1 << 2)|(1 << 0));
ADMUX |= (1 << 1);
break;

case 3: //select A2D channel 3
ADMUX &= ~((1 << 3)|(1 << 2));
ADMUX |= ((1 << 1)|(1 << 0));
break;
/* I am not using these for this project
case 4: //select A2D channel 4
ADMUX &= ~((1 << 3)|(1 << 1)|(1 << 0));
ADMUX |= (1 << 2);
break;

case 5: //select A2D channel 5
ADMUX &= ~((1 << 3)|(1 << 1));
ADMUX |= ((1 << 2)|(1 << 0));
break;
*/
}//end switch
}

void Delay(void)
{
_delay_us(100);
}

[2goto1]

looks like c

[cubera]

2goto1 @ Mon Apr 30, 2012 8:20 am wrote:

looks like c

as in regular C? or C#?

[2goto1]

regular c

[md]

Regular C with a bunch of ATMEGA library stuff. Looks like the source is incomplete too as those includes aren't valid.