Programming C, C++, Java, PHP, Ruby, Turing, VB
Computer Science Canada 
Programming C, C++, Java, PHP, Ruby, Turing, VB  

Username:   Password: 
 RegisterRegister   
 Anyone an expert on routers and ports?
Index -> General Discussion
Goto page 1, 2  Next
View previous topic Printable versionDownload TopicSubscribe to this topicPrivate MessagesRefresh page View next topic
Author Message
Paul




PostPosted: Tue Dec 13, 2005 1:16 am   Post subject: Anyone an expert on routers and ports?

I should know something, I took networking in compeng >_<
but alas, I've tried everything.

If you use azureus (bittorrent), you'll know that the green smiley symbol indicates everything is fine, and if you get a yellow one, it means you may have a NAT problem.

That is tested one of two ways:
1. Through the built-in "Nat/Firewall tester"
2. https://www.grc.com/x/portprobe=4900 (changing the last number to your port that you use for azureus)

Both indicate I have NAT problems, the second one says I have "stealth" status for that port.

If its not too much trouble, could anyone who has the green smiley for their downloads in azureus run a check on the website?

I've forwarded the port I'm using correctly on my router, but I've ran out of ideas.
Sponsor
Sponsor
Sponsor
sponsor
Mazer




PostPosted: Tue Dec 13, 2005 9:59 am   Post subject: (No subject)

It says mine is stealth. Maybe that's because I don't have Azureus running right now? I've had lots of problems with Azureus thinking my port isn't forwarded properly when it was. Try going into your router settings and disabling and enabling the port.
codemage




PostPosted: Tue Dec 13, 2005 12:07 pm   Post subject: (No subject)

Weak torrents will often have weak health.
Slow servers or few seeders will cause this.

Otherwise, make sure your router is set to port-forward TCP and UDP on a port that isn't blacklisted. (6880 is blacklisted by default by a lot of servers).

Then make sure that any firewall programs you have running (including the windows XP firewall) are allowing traffic in & out of that port.
Andy




PostPosted: Tue Dec 13, 2005 3:26 pm   Post subject: (No subject)

what router are u using? maybe its a router problem.. i think i used to have the same problem with my dlink... worst case, put the ip assigned to the comp on the dmz and see if it works
Paul




PostPosted: Tue Dec 13, 2005 9:51 pm   Post subject: (No subject)

Interesting idea...
I'm using a smc 700vbr pretty cheap and crappy router.
And yes I've set a static IP outside the lease range. ALso forwarded a port in the 40000~ range. Ignoring torrent strength, I think I have NAT problems based on that link I went to (provided by azureus wiki) and the internal NAT test.
codemage




PostPosted: Wed Dec 14, 2005 9:18 am   Post subject: (No subject)

...and your firewall?
Paul




PostPosted: Wed Dec 14, 2005 8:07 pm   Post subject: (No subject)

I said I'm not using a firewall oO
Andy




PostPosted: Wed Dec 14, 2005 9:44 pm   Post subject: (No subject)

have u tried to disable the router's firewall?
Sponsor
Sponsor
Sponsor
sponsor
Paul




PostPosted: Wed Dec 14, 2005 9:54 pm   Post subject: (No subject)

Yes, router's firewall is disabled lol
I guess this is an unfixable issue :S
timmytheturtle




PostPosted: Thu Dec 15, 2005 6:22 am   Post subject: (No subject)

Azureus seems way to complex to setup (for ports). I only forwarded ports 5881-5999, and everything's fine for me.
Maybe you should try a different client.
Also if you got the money, maybe you should spring for a better router.
codemage




PostPosted: Thu Dec 15, 2005 2:08 pm   Post subject: (No subject)

Azureus works fine for me through
a cheap wireless router
a 3rd party firewall (windows firewall is turned **off**)
Peerguardian (IP filter)
brenn




PostPosted: Fri Dec 16, 2005 7:42 pm   Post subject: (No subject)

:/ I can't get a green status light with Bit Tornado, either; I've forwarded the ports (10000 ~ 10005 .. I know, small range, but I only run one or two torrents at a time), disabled computer firewalls, but I'm still NATed. :/ My ports were reportedly stealthed too, but I have no idea what this means nor how to go about fixing it :/

Do you at least have traffic in/out? Mine only seems to work if I manually announce about every minute >_< and even then, it goes at < 1 kb/s *dies*
codemage




PostPosted: Mon Dec 19, 2005 1:07 pm   Post subject: (No subject)

Stealth means that your ports are invisible to the outside.

In other words, you can connect to other peers using P2P, but they can't initialize connections with you. You're running at 50% effectiveness.
brenn




PostPosted: Tue Dec 20, 2005 8:05 pm   Post subject: (No subject)

How do I fix it? :S
codemage




PostPosted: Thu Dec 22, 2005 12:49 pm   Post subject: (No subject)

Checklist
    windows firewall disabled
    3rd party firewall allows connections IN and OUT
    - either on your port of choice or for your P2P application
    your port isn't blacklisted (go random or pick one that isn't 6880-6881)
    firewall is port forwarding the port you've picked


If all that is done, you might be on a blocked or banned IP for the tracker or peerguardian/bluetack, etc.

Or... your ISP might be throttling back suspected P2P ports and/or users.
Display posts from previous:   
   Index -> General Discussion
View previous topic Tell A FriendPrintable versionDownload TopicSubscribe to this topicPrivate MessagesRefresh page View next topic

Page 1 of 2  [ 16 Posts ]
Goto page 1, 2  Next
Jump to:   


Style:  
Search: